Miele KWT 6833 SG Operating And Installation Instructions Download

Page: 18 / 72

Accessories

Accessories supplied

Active AirClean filter

The active charcoal filters in the back
wall achieve optimum air quality by
filtering the incoming air.

Chalk

Use the chalk to annotate the magnetic
strips on the wooden shelves to identify
your wines quickly and easily.

Optional accessories

A range of useful Miele accessories and
care products are available for your
wine conditioning unit.

Active AirClean filters

See “Accessories supplied”.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for
removing fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

Stainless steel care

Each application of the

stainless steel

conditioner

(supplied in a bottle) forms

a water and dirt repellent protective
coating. It gently removes water marks,
fingerprints and other dirt for a
uniformly shiny surface.

Accessories are available to order via
the Miele Webshop, from Miele
directly (see back cover for contact
details) or from your Miele dealer.

Summary of Contents for KWT 6833 SG









































































Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands

Miele KWT 6833 SG, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands