Miele KWT 6322 UG, Operating And Installation Instructions

Page: 66 / 80

Installation
*INSTALLATION*
66
Installing the wine conditioning
unit
Before installing the wine condition-
ing unit

Take any accessories out of the appli-
ance.

Remove the cable clip from the back
of the appliance (depending on
model).

Risk of damage and injury from
the wine conditioning unit tipping
over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.
 Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
 The building-in niche must be hori-
zontally and vertically aligned.

The required ventilation gaps must be
provided (see “Ventilation” and “In-
stallation dimensions” under “Installa-
tion”).
To install the wine conditioning unit,
you will need the following tools:
– A selection of screwdrivers
– a spirit level
– a tape measure
The following installation parts are
required:
– Ventilation grilles
– Air filter
– Foam block for air filtration in the
appliance plinth
– Screws to secure the appliance in
the niche
– Wrench to adjust height in the
niche