Miele KWT 6322 UG, Operating And Installation Instructions

Page: 58 / 80

Installation
*INSTALLATION*
58

Risk of damage due to high hu-
midity.
In environments with high humidity,
condensation can build up on the ex-
ternal wine conditioning unit panels,
which can cause corrosion.
Install the wine conditioning unit with
sufficient ventilation in a dry and/or
air-conditioned room.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered, and
the wine conditioning unit has been
installed in accordance with these
operating and installation instruc-
tions.
Ventilation
The appliance is ventilated via the venti-
lation gap in the plinth. This must not
be covered over or blocked. Clean the
ventilation gap regularly to remove any
dust.
The cut-out in the unit base must be in
the center of the wine conditioning
unit.
Door opening angle limiter
The door opening angle limiter restricts
the opening angle of the appliance door
to 90°. For example, this may be neces-
sary if the appliance door hits an adja-
cent wall when opened (see “Adjusting
the door hinges”).