Miele KWT 6322 UG Operating And Installation Instructions Download

Page: 12 / 80

IMPORTANT SAFETY INSTRUCTIONS

Transport



Always transport the wine conditioning unit in an upright position

and in its original transport packaging to avoid damage in transit.



Risk of injury and damage. The wine conditioning unit is very

heavy and must be transported by two people.

Disposing of your old appliance



If your old wine conditioning unit or refrigerator has a door lock,

destroy it.
This will prevent the risk of children playing accidentally locking
themselves in and endangering their lives.



Splashes of coolant can cause damage to the eyes. Be careful not

to damage any part of the pipework while awaiting disposal, e.g. by

– puncturing the coolant channels in the evaporator,

– kinking any pipework,

– scratching the surface coating.

Summary of Contents for KWT 6322 UG

















































































Search results

Summary of Contents for KWT 6322 UG

Reviews:

Related manuals for KWT 6322 UG

Brands by name

Popular brands

Miele KWT 6322 UG, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6322 UG

Reviews:

Related manuals for KWT 6322 UG

Brands by name

Popular brands