Miele KWT 6322 UG, Operating And Installation Instructions

Page: 61 / 80

Installation
*INSTALLATION*
61
Adjusting the door hinge
The door hinges on the wine condition-
ing unit are set at the factory to enable
the appliance door to be opened wide.
However, if the opening angle of the ap-
pliance door needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°.
The locking pins for limiting the door
opening must be fitted before the ap-
pliance is installed.
 Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.
Reversing the door hinge
The wine conditioning unit is supplied
right-hinged. If left-hand hinging is re-
quired, the hinges must be changed.
To change the door hinging, you will
need the following tools:

Risk of injury and damage.
The glass door is breakable.
The glass door is heavy. Always
change the door hinging with the as-
sistance of another person.

Risk of injury and damage.
The glass door can drop.
When changing the door hinging,
make sure that all fixing parts are se-
curely screwed into position.
Tip: Place a suitable cover on the floor
in front of the wine conditioning unit to
protect the glass door and your floor
from damage when changing the hing-
ing.
Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close prop-
erly and cooling will be insufficient.