Miele KWT 6322 UG Operating And Installation Instructions Download

Page: 21 / 80

Switching the wine conditioning unit on and off

The interior lighting will come on when
the appliance door is opened.

Selecting settings

A different setting can be set for each
wine conditioning zone.



To do this, touch the sensor for the
wine conditioning zone for which you
want to adjust the settings.

The sensor that has been selected is
highlighted in yellow. Now you can:

– set the temperature

– switch on the DynaCool function

Tip:

Please refer to the relevant sec-

tions for more information.

If you then select a different wine con-
ditioning zone, the settings for the pre-
viously selected zone will remain un-
changed.

Switching the wine conditioning unit
off



Touch the On/Off sensor.
If this does not work, the safety
lock



is activated.

The sensors for the 2 wine conditioning
zones will go out in the control panel.
The temperature shown on the display
will go out and the power connection
symbol



appears.

The interior lighting goes out and cool-
ing is switched off.

Turning off the wine unit in Sabbath
mode

You can turn the wine unit off at any
time.



Touch the On/Off sensor.

The sensors for the two wine condition-
ing zones will go out in the control
panel.

The temperature shown in the display
will go out and the power connection
symbol



appears.

The interior lighting goes out and cool-
ing is turned off.

As soon as the wine unit is turned on
again the Sabbath mode is switched
off.

Summary of Contents for KWT 6322 UG

















































































Search results

Summary of Contents for KWT 6322 UG

Reviews:

Related manuals for KWT 6322 UG

Brands by name

Popular brands

Miele KWT 6322 UG, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6322 UG

Reviews:

Related manuals for KWT 6322 UG

Brands by name

Popular brands