Miele KMDA 7476 FL, Operating And Installation Instructions

Page: 42 / 100

Operation
42
Vapour extraction
The vapour extraction will switch itself
on automatically if there is an item of
cookware on a cooking zone and a
power level has been set for that zone
(Con@ctivity). The power level for
vapour extraction is set to suit the
power level of the cooking zone.
You can deactivate Con@ctivity
temporarily or permanently. To
deactivate Con@ctivity permanently,
see “Programming”. If Con@ctivity is
permanently deactivated, the
 sensor
control will no longer be illuminated.
The power level of the vapour extraction
can be manually altered at any time.
Power levels 1 to 3 and a Booster level
are set as standard. The power levels
can be extended to 1 to 9 and a
Booster level, see “Programming”.
For light to heavy cooking vapours and
odours, select from power levels
1 to 3
(9 with the extended power levels). For
short periods of very strong vapours
and odours, e.g. whilst searing meat,
select the
B Booster setting.
If the cooker hood starts with power
level 1, the power is automatically
increased to level 2 for 20 seconds.
This automatic function is necessary
in order to ensure that the flap opens
in extraction mode. If you are using
the cooker hood in recirculation mode,
you can deactivate this automatic
function, see “Programming”.
Tip: To help release vapours effectively
with pans over 15 cm high, place a
wooden spoon between the lid and the
pan.