Miele KMDA 7476 FL, Operating And Installation Instructions

Page: 37 / 100

Operation
37
Residual heat indicator
If a cooking zone is hot, the residual
heat indicator will light up after it has
been switched off or if it is not in use.
The bars of the residual heat indicator
go out one after the other as the
cooking zone cools down. The last
horizontal bar only goes out when the
cooking zone is safe to touch.

Risk of burning due to hot
cooking zones.
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.
Setting the power level –
extended setting range

Touch the numerical display in
between two number sensors.
A dot appears after the power level in
the cooking zone selection.
The sensor controls to the left of the
interim level light up brighter than the
other sensor controls.
Example:
If you have set power level 7., the
cooking zone selection will show 7..
The number 7 on the numerical display
will light up brighter than the other
sensor controls.