Miele KMDA 7476 FL Operating And Installation Instructions Download Page 47

Page: 47 / 100

Additional functions

Wipe protection

The hob sensor controls can be
locked for 20 seconds, e.g. to remove
soiling. The



sensor control is not

locked.

Activating



Touch the



sensor control.



Touch the



sensor control.

The time counts down in the timer
display.

Deactivating



Touch the



sensor control until the

timer display goes out.

Demo mode

These functions enable the hob to be
demonstrated in showrooms without
heating up.

Activating/deactivating demo mode

When this mode is set, the hob can be
operated as normal.



Switch the hob on.



Place an induction-compatible item
of cookware on the hob.



Touch and hold the 0 and 2 sensor
controls on the numerical display at
the same time for 6 seconds.

In the timer display,



flashes

alternately with



(demo mode

activated) or



(demo mode

deactivated) for a few seconds.

Displaying hob data

The model number and software
version of the hob can be displayed.

Model number/serial number



Switch the hob on.



Place an induction-compatible pan
on the hob.



Touch and hold the 0 and 4 sensor
controls on the numerical display at
the same time.

Numbers will appear in the timer display
one after another, separated by a dash.

Example:





(model number

KM 1234) –











(serial

number)

Software version



Switch the hob on.



Place an induction-compatible pan
on the hob.



Touch and hold the 0 and 3 sensor
controls on the numerical display at
the same time.

Numbers appear in the timer display:

Example:

:

= software version 2.00

Summary of Contents for KMDA 7476 FL





































































































Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands

Miele KMDA 7476 FL, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands