Miele KMDA 7476 FL Operating And Installation Instructions Download Page 41

Page: 41 / 100

Operation

Keeping warm

This function is for keeping food warm
which has just been cooked and is still
hot. It is not for reheating food that
has gone cold.

The maximum duration for keeping food
warm is 2 hours.

- Only use pans for keeping food

warm. Cover the pan with a lid.

- Stir firm or viscous food (mashed

potatoes, stew) occasionally.

- Nutrients are lost when food is

cooked, and continue to diminish
when food is kept warm. The longer
food is kept warm, the greater the
loss of nutrients. Try to ensure that
food is kept warm for as short a time
as possible.

Activating/deactivating the Keeping
warm function



Touch the cooking zone display for
the required cooking zone.



Touch the



sensor control.

Summary of Contents for KMDA 7476 FL





































































































Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands

Miele KMDA 7476 FL, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands