Miele KMDA 7476 FL Operating And Installation Instructions Download Page 43

Page: 43 / 100

Operation

Setting the power level/Switching off
vapour extraction



Touch the vapour extraction display.



To switch the fan on touch the
appropriate sensor for the power
level you want.



To switch the fan off touch the

sensor.

If the vapour extraction is not switched
off manually, it will switch itself off
automatically 12 hours after last being
used.

Deactivating Con@ctivity temporarily

The vapour extraction has switched on
automatically.



You can deactivate Con@ctivity in
various ways:

- Touch the



sensor control

- Touch the 0 sensor control

- Select a different power level



Set the power level you want.

Depending on the programming,
Con@ctivity will be reactivated when
you switch the hob off and back on
again, see “Programming”.

If you want to deactivate Con@ctivity
permanently, you will need to change
the Con@ctivity programming, see
“Programming”.

Booster

The maximum duration for the Booster
is 10 minutes.



To switch it off early, set a different
power level.

Run-on time

It is advisable to run the fan for a few
minutes after cooking has finished. This
helps to neutralise any lingering
vapours and odours in the air. The
following two options are available:



(5 minutes) and



(15 minutes).

The run-on duration will be carried out
using the power level set during
activation. You can change the power
level during the run-on period.



Touch the





sensor to activate

the run-on period.



Touch the





sensor to

deactivate the run-on period.

If you switch the hob off with the



sensor, the run-on period will continue
through to the end.

Summary of Contents for KMDA 7476 FL





































































































Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands

Miele KMDA 7476 FL, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands