Miele KMDA 7476 FL Operating And Installation Instructions Download

Page: 26 / 100

Before using for the first time

Setting up Miele@home

Connecting via the app

The Miele app can be used to connect
to your network.

To connect, you will need:

1. Your WiFi network password

2. The password for your hob

The password for your hob consists of
the last 9 digits of the serial number.
This can be found on the appliance’s
data plate.



Install the Miele app on your mobile
device.



Start the Miele app.



Switch the hob on.



Touch any cooking zone display.



Touch the 0 and 5 sensor controls at
the same time for 6 seconds.

The seconds can be seen counting
down in the timer display. After the time
has elapsed, the code

:

is displayed

in the timer display for 10 seconds.

You now have 10 minutes to configure
the WiFi.



Follow the user navigation in the app.

Connecting via WPS

Prerequisite: you must have a WPS
(WiFi protected setup) compatible
router.



Switch the hob on.



Touch any cooking zone display.



Touch the 0 and 6 sensor controls at
the same time for 6 seconds.

The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears
during the connection attempt (for max.
120 seconds).

The WPS login is only active during
these 120 seconds.



Activate the WPS function on your
WiFi router.

If the connection was successful, the
code

:

appears in the timer display.

If the connection could not be
established, the timer display will show
the code

:

. You have probably not

activated WPS on your router quickly
enough. Repeat the steps above.

Tip:

If your WiFi router does not support

WPS, please connect via the Miele app.

Summary of Contents for KMDA 7476 FL





































































































Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands

Miele KMDA 7476 FL, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands