Miele H6560BP Operating And Installation Instructions Download

Page: 44 / 148

Display brightness

The brightness is represented by a bar
with seven segments.

P P P P G G GM

Select "Darker" or "Brighter" to
change the brightness of the display.

Buzzer tones

Melody

At the end of a process, a melody will
sound several times in intervals.

The volume of the melody is
represented by a bar with seven
segments.

P P P P G G GM

Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
melody is switched off.

Select "Quieter" or "Louder" to change
the volume.

Select "On" or "Off" to switch the
melody on or off.

Solo tone

At the end of a process, a continuous
tone will sound for period of time.

The pitch of this tone is represented by
a segment bar.

O O O O O O O O F F F F F FM

Select "Lower" or "Higher ", to change
the pitch.

Select "On" or "Off" to switch the Solo
tone on or off.

Keypad tone

An audible tone is heard each time a
sensor is touched.

The volume of the keypad tone is
represented by a bar with seven
segments.

P P P P G G GM

Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
keypad tone is switched off.

Select "Quieter" or "Louder" to change
the volume.

Select "On" or "Off" to switch the

keypad tone on or off.

Settings

Summary of Contents for H6560BP





















































































































































Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands

Miele H6560BP, Operating And Installation Instructions

Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands