Miele H6560BP Operating And Installation Instructions Download

Page: 17 / 148

Cleaning and care

Do not use a steam cleaning appliance to clean this appliance.

The steam could reach electrical components and cause a short
circuit.

Scratches on the door glass can result in the glass breaking. Do

not use abrasive cleaners, hard sponges, brushes or sharp metal
tools to clean the door glass.

The side runners can be removed for cleaning purposes (see

"Cleaning and care"). Ensure that they are replaced correctly and do
not use the oven without them fitted.

Coarse soiling should be removed before running the Pyrolytic

cleaning programme. If not removed, coarse soiling can smoke and
cause the Pyrolytic cleaning programme to switch itself off.

Warning and Safety instructions

Summary of Contents for H6560BP





















































































































































Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands

Miele H6560BP, Operating And Installation Instructions

Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands