Miele H6560BP Operating And Installation Instructions Download

Page: 126 / 148

Problem

Possible cause and remedy

The oven does not heat
up.

Check whether "On" has been selected for demo
mode (see "Settings - Showroom programme").

If demo mode has been switched on the oven can be
operated but it will not heat up.

Deactivate demo mode.

"Power cut - Process
cancelled" appears in
the display.

There has been a power cut which has caused a
current process to stop.

Switch the oven off and then back on again.
Start the cooking programme again.

12:00 appears in the
display.

The power supply was interrupted for longer than 200
hours.

Reset the time and date.

The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.

The oven has been operating for an unusually long time
and this has activated the safety switch-off function.

Select "OK". Touch

to delete "Process finished".

The oven will then be ready for use again.

Problem solving guide

126

Summary of Contents for H6560BP





















































































































































Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands

Miele H6560BP, Operating And Installation Instructions

Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands