Miele H6560BP Operating And Installation Instructions Download

Page: 130 / 148

Problem

Possible cause and remedy

The oven lighting
switches off after a short
time.

The oven lighting is set to switch off after 15 seconds
(default setting).

You can change the default setting for this (see
"Settings - Lighting").

The top oven lighting
does not switch on.

The halogen lamp needs replacing.

Danger of burning.
Make sure the oven heating elements are switched
off and cool.

Disconnect the appliance from the mains.

Turn the lamp cover a quarter turn anti-clockwise to
release it and then pull it together with its seal
downwards to take it out.

Replace it with a new halogen lamp
(Osram 66725 AM/A, 230 V, 25 W, G9).

Refit the lamp cover together with its seal and turn
clockwise to secure.

Reconnect the oven to the electricity supply.

Problem solving guide

130

Summary of Contents for H6560BP





















































































































































Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands

Miele H6560BP, Operating And Installation Instructions

Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands