Miele H6560BP Operating And Installation Instructions Download

Page: 35 / 148

PerfectClean treated surfaces

PerfectClean surfaces have very good
non-stick properties and are much
easier to keep clean than conventional
enamel surfaces, if cleaned regularly.

Food can be taken off these surfaces
easily, and soiling from baking and
roasting is simple to remove.

Food can be sliced or cut up on
PerfectClean surfaces.

However, do not use ceramic knives
as these will scratch the
PerfectClean surface.

Surfaces treated with PerfectClean
enamel can be cleaned as you would
clean glass.

Read the instructions in "Cleaning and
care" so that the benefits of the
non-stick properties and easy cleaning
are retained.

The following have all been treated with
PerfectClean:

– Universal tray

– Baking tray

– Anti-splash insert

– Perforated baking tray

– Round baking tray

Pyrolytic accessories

The following accessories can be left in
the oven during the Pyrolytic cleaning
programme.

– Side runners

– FlexiClip telescopic runners

– Rack

See "Cleaning and care" for more
information.

Features

Summary of Contents for H6560BP





















































































































































Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands

Miele H6560BP, Operating And Installation Instructions

Search results

Summary of Contents for H6560BP

Reviews:

Related manuals for H6560BP

Brands by name

Popular brands