Problem solving guide
84
Problem
Possible cause and remedy
The sensors do not
respond.
You have selected the
Display
|
QuickTouch
|
Off
setting.
When the oven is switched off, the sensors do not
respond.
As soon as the oven is switched on, the sensors
will respond. If you want the sensors to respond
even when the oven is switched off, select the
Display
|
QuickTouch
|
On
setting.
The oven is not connected to the power supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
There is a fault with the control unit.
Touch and hold the On/Off
sensor until the
display switches off and the oven restarts.
Press OK for 6 seconds
appears in the display
when the oven is
switched on.
The system lock
has been switched on.
You can deactivate the system lock for a
programme by touching the
OK
sensor for at least
6 seconds.
If you want to permanently deactivate the system
lock, select the
Safety
|
System lock
|
Off
setting.
Power cut
appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00
appears in the
display.
The power supply was interrupted for longer than 150
hours.
Reset the time and date.
Max. op. hours reached
appears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
Confirm with
OK
.
The oven is now ready to use.
Fault
and a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
Call Miele.