Miele G 6900 Page 18 Operating Instructions Manual Download

Page: 18 / 100

Caring for the environment

Disposal of the packing

material

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.
The packaging consists of the following

materials:
Outer packaging:

– Corrugated cardboard made from up

to 100% recyclable material:

or: Polyethylene (PE) shrink wrap

– Polypropylene (PP) strapping

Inner packaging:

– Chlorine and fluorine free expanded

polystyrene (EPS)

– Base, lid frame and support battens

made from untreated natural wood

from renewable forests

– Polyethylene (PE) protective wrap

Recycling the packaging reduces the

use of raw materials in the

manufacturing process and also

reduces the amount of waste in landfill

sites.

Disposing of your old

appliance

Electrical and electronic appliances

often contain valuable materials. They

also contain materials which, if handled

or disposed of incorrectly, could be

potentially hazardous to human health

and to the environment. They are,

however, essential for the correct

functioning of your appliance. Please

do not therefore dispose of it with your

household waste.

Please dispose of it at your local

community waste collection / recycling

centre or contact your dealer for

advice.
Ensure that it presents no danger to

children while being stored for disposal.
To enable sorting by type of plastic for

recycling, all plastic parts of the

appliance are labelled with international

standard symbols.

Summary of Contents for G 6900





































































































Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands

Miele G 6900, Operating Instructions Manual

Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands