Miele G 6900 Page 52 Operating Instructions Manual Download

Page: 52 / 100

Programme options

Start at

With the

Start at

function, you set the

exact time you want the programme to

start at.



Use the

+/-

sensors to set the hour

and confirm with

The hours will be saved and the minute

number block will be highlighted.



Use the

+/-

sensor to set the minutes

and confirm with

The display will change to show the

programme menu.



Select

to start the programme.

The

Start

inciator will light up.

The programme name and the start

time then appear in the display.
When the set time is reached, the

programme selected will begin

automatically.

Finish at

With the

Finish at

function, you set the

time you wish the programme to end at.



Use the

+/-

sensors to set the hour

and confirm with

The hours will be saved and the minute

number block will be highlighted.



Use the

+/-

sensor to set the minutes

and confirm with

The display will change to show the

programme menu.



Select

to start the programme.

A message will appear in the display if

the programme cannot be completed

by the set finish time because it has too

long a running time.
The

Start

indicator will light up.

The programme name and the

estimated start time for the programme

selected will appear in the display.
The selected programme will start

automatically when the estimated start

time is reached.

Summary of Contents for G 6900





































































































Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands

Miele G 6900, Operating Instructions Manual

Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands