Miele G 6900, Operating Instructions Manual

Page: 51 / 100

Programme options
51
Delay start with EcoStart
There are three ways of starting the
programme by means of delaying the
start. You can set the start time or the
finish time of a programme. You also
have the option of taking advantage of
time variable economy rates of
electricity using the
EcoStart
function.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
Do not use liquid detergent when
selecting Delay start, as it can run
into the dishwasher before it is
required.

To prevent children coming into
contact with dishwasher detergent:
Add the detergent
immediately
before starting the programme, i.e.
before activating delay start with
OK
.
Then lock the door with the safety
lock.

Switch the dishwasher on using the

sensor.

Select the programme you want from
the main menu.

Select the
Delay start
option from the
programme menu for the selected
programme.
You then have a choice of
Start at
,
Finish
at
and
EcoStart
.

Select the one you want.
Now enter the time you want.
If, while you are setting the time, you do
not press any sensors for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If you keep the
+
or
-
sensor pressed,
the value shown will automatically
increase or decrease.
If the time of day display has been
switched off (see "Settings menu,
Time") the display will go out after a
period of 10 minutes.
To switch the display back on for a
few minutes press the

sensor.