Miele G 6900 Page 13 Operating Instructions Manual Download

Page: 13 / 100

Warning and Safety instructions



Do not connect the appliance to the mains electricity supply by a

multi-socket adapter or an extension lead. These do not guarantee

the required safety of the appliance (fire hazard).



The appliance must not be used in a non-stationary location (e.g.

on a ship).



Do not install the dishwasher in a room where there is a risk of

frost. Frozen hoses may burst or split. The reliability of the electronic

control unit may be impaired at temperatures below freezing point.



The plastic housing of the water connection contains an electrical

component. It must not be dipped in water.



There are electrical wires in the water inlet hose. Do not cut the

water inlet hose, even if it is too long.



The integrated Waterproof system offers protection from water

damage, provided the following conditions are met:

– The dishwasher is correctly installed and plumbed in.
– The dishwasher is properly maintained and parts are replaced

where it can be seen that this is necessary.

– The stopcock has been turned off when the appliance is not used

for a longer period of time (e.g. during holidays).

The Waterproof system will work even if the appliance is switched

off. However, the appliance must remain connected to the electricity

supply.



The water pressure (flow pressure at the take-off point) must be

between 30 and 1000 kPa (0.3 and 10 bar).



If the dishwasher gets damaged, switch it off at the mains

immediately and call your Miele Dealer or the Miele Service

Department.



While the appliance is under guarantee, repairs should only be

undertaken by a Miele authorised service technician. Otherwise the

guarantee is invalidated.

Summary of Contents for G 6900





































































































Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands

Miele G 6900, Operating Instructions Manual

Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands