Miele G 6900 Page 87 Operating Instructions Manual Download

Page: 87 / 100

Settings menu

Rinse aid

You can adjust the rinse aid dosage for

best results.

The rinse aid dosage can be set from

approx. 0-6 ml.

The factory default setting is 3 ml.
If the function to adjust the Sensor

wash programme has been activated,

the amount of rinse aid dispensed in

the

Sensor wash

programme can be

higher than that set.
If spots appear on crockery and

glassware:

– Increase the rinse aid dosage.

If clouding or smearing appears on

crockery and glassware:

– Decrease the rinse aid dosage.



Use the

+/-

sensors to set the rinse

aid dosage and confirm with

Consumption (EcoFeedback)

You can programme the dishwasher so

that the energy and water consumption

of the currently selected programme

appears in the display. The estimated

consumption can be displayed before

the programme starts and the actual

consumption can be displayed after the

programme has finished.

In this menu you can also call up the

total energy and water used in all

previous dishwasher programmes (see

"Caring for the environment,

EcoFeedback consumption indicator").

Consumption indicator



Select the

Display consumption

option.



Select the setting you want and

confirm with

Total consumption

You can display the values for

Energy

and

Water



Select the

Total consumption

option.

You can also reset the values for the

total consumption to 0.



Select the

Reset

option.



Select the

Yes

option.



Confirm the message with

The values are now reset to 0.

Summary of Contents for G 6900





































































































Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands

Miele G 6900, Operating Instructions Manual

Search results

Summary of Contents for G 6900

Reviews:

Related manuals for G 6900

Brands by name

Popular brands