manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 56

Cleaning and care

56

 Descale

After an activation time of approx.
1 hour, the descaling solution is drained
from the steam generator into the resid-
ual water drawer.

The steam generator is then rinsed with
water. This rinse cycle takes approx.
5 minutes. During this time, the 

 

Rins-

ing (5 min)

 message is displayed.

During the rinsing cycle, the message

 

Rinsing

 is displayed.

Once the rinsing cycle is completed, the
water is drained completely into the re-
sidual water drawer and the message

 

Empty drawer

 is displayed.

 Empty drawer

Remove the residual water drawer
and empty it.

The message 

 

Fit drawer

 is now

shown in the display.

Rinse the residual water drawer thor-
oughly.

The residual water drawer is dish-
washer-safe or can be washed by
hand using warm water and a little
washing-up liquid.

Dry the residual water drawer. Make
sure that the metal contact disks
(contacts) at the top of the residual
water drawer are clean and dry.

Slide the residual water drawer back
into the tower until it clicks into place.

The message 

 

Descaling finished

 will ap-

pear in the display.

Press the 

OK

 button.

The descaling process is now com-
pleted. You can attach the iron or the
steamer back onto the steam connec-
tion on the tower.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands