Cleaning and care
50
Descaling warning
Descale soon
will appear in the dis-
play the next time you switch the steam
ironing system on if there are only about
2 hours of ironing available before the
system needs descaling.
You can start the descaling process
whilst the system is cold via the Set-
tings menu (see "Starting the descaling
process early") or you can press the
OK button to confirm the message in
the display and continue ironing as nor-
mal. The
symbol will continue to
show in the display until descaling is
carried out.
After the remaining operating hours
have elapsed, the descaling process
must be carried out before the steam
ironing system can be used again.
You can also start the descaling pro-
cess at a time that suits you (see
"Starting the descaling process
early").
You can interrupt the descaling process
by switching the steam ironing system
off with the
button. When you switch
the system back on, descaling will start
again from the point where the process
was interrupted.
The messages in the display will guide
you through the descaling process. The
entire descaling process takes approx.
90 minutes.
Follow the required procedures when
prompted by the messages in the dis-
play. After starting the descaling pro-
cess, you must be present after approx.
20 minutes and subsequently after an
additional 60 minutes. The steam iron-
ing system can be left unattended for
the rest of the time.
Tip:
To optimise the descaling process,
start the procedure while the system is
still cold after switching the steam iron-
ing system on. This way, you avoid a
delay of up to 3 hours that may be
caused by the cool-down phase.
Summary of Contents for FashionMaster
Page 78: ...78 ...
