manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 38

Ironing

38

Memory function

The memory function saves the fan dir-
ection and the power setting used last
with your steam ironing system. When
you use the appliance the next time,
you do not need to set it again.

Heated ironing surface

When the iron is connected and the
steam ironing system is switched on,
the surface of the ironing board will
heat up automatically. This function re-
duces the formation of condensation on
the ironing board.

If the steamer is connected to the
steam ironing system, the surface of
the ironing board will not be heated.

Fan control for the B 3312:

The 

 button activates the inflation

function.

The 

 button activates the suction

function.

Fan control for the B 3826 / B 3847:

Activating the inflation and suction
function

Press the 

 button to switch between

the inflation function and the suction
function. Use the button to activate the
function.

Setting the power level

When using the 

 button, you can

switch between both fan power levels.
Each press of the 

 button switches

between the following power levels:

– Level 1 = 1 fan active

– Level 2 = 2 fans active

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands