manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 54

Cleaning and care

54

 Empty drawer

This message may be displayed after
inserting the water container with the
descaling tablet. If you do not see this
message, you can skip the following
steps and continue as soon as you see
the 

 

Pre-rinse

 message in the display.

Set the steam ironing system to its
highest working position in order to
remove the residual water drawer
(see "Height adjustment").

Remove the residual water drawer
from the tower.

The residual water drawer may still
be warm after the rinsing process.

Empty the residual water drawer.

As long as the residual water drawer is
not inserted into the tower, the display
will show the following message 

 

Fit

drawer

.

 Fit drawer

Slide the residual water drawer back
into the tower until it clicks into place.

 Pre-rinse

If the steam ironing system is still hot
from the previous use, the cool down
phase will start first. This may take up
to 3 hours.

The pre-rinse phase then follows (dura-
tion approx. 20 minutes). During this
time, a portion of the descaling solution
is pumped into the steam generator.

After the pre-rinse phase you will be
prompted to carry out further actions.
This will be shown for a few seconds
before the pre-rinse phase starts and
will be indicated by the message 

 

In

20 min. 

.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands