manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 51

Cleaning and care

51

Starting the descaling process early

Ready for use

When the steam ironing system is
switched on, press the 

 button on

the control panel.

You are now in the settings menu. Use
the arrow buttons to select the indi-
vidual options.

Language 

Use the 

 or 

 arrow buttons to select

the 

Descale

 option.

Descale

Confirm your selection by pressing
the 

OK

 button.

Select the 

Start descaling

 option.

Confirm your selection by pressing
the 

OK

 button.

The descaling process will now start.

Descaling process

The following display messages will
guide you through the entire descaling
process. Only proceed with the re-
quired action if you are prompted to
do so by the appropriate message in
the display.

 Detach hose

Remove the steam hose of the iron or
the steamer from the steam connec-
tion on the tower.

The iron or the steamer must not be
attached to the steam connection
during the entire descaling process.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands