manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 52

Cleaning and care

52

 Fill water container to the mark

Hold the water container by its
handle.

Pull the handle downwards.

The water container is released from the
retainer.

Pull the water container upwards and
out.

When removing the water container,
you may notice some water dripping
while the water container valves are
closing.

Tip: 

The dripping can be prevented by

removing the water container slowly.

After removing the water container, the
message 

 

Add descaler

 will appear in

the display.

 Add descaler

Turn the screw cap at the back of the
water container anti-clockwise and
remove the cap.

Level mark on the water container

Use fresh tap water to fill the water
container (water temperature approx.
15 to 35 °C) to the level marking line.
It is important not to use more or less
water to fill the water container.

Add 1 descaling tablet to the water
container.

Replace the screw cap on the water
container.

Turn the screw cap clockwise as far
as it will go.

The screw cap is now closed.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands