manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 23

Connection

23

Guide the steam hose on the rubber
ring into the steam hose holder.

Ensure the steam hose fits tightly
and is not twisted.

Always place the iron on the resting
surface before you start ironing and
when you take a break from ironing.
This prevents damaging or discolour-
ation of the ironing board cover.

Do not place the iron in an up-

right position!
It can easily tip over or fall to the
floor.
Always place the iron onto the rest-
ing surface with its soleplate down.

If the iron remains on the resting

surface for any length of time, the
surface will become hot.
Avoid direct contact with the resting
surface.
Only touch the handle.

Before turning off the iron, and be-
fore placing the iron down, make
sure you switch off the continuous
steam function.
If the continuous steam function is
not switched off, the following mes-
sage will appear in the display

 

Release stm. button

.

Unlock the 

 button by pushing the

slider on the iron forward (see "Iron-
ing").

Condensation can form on the resting
surface. However, this does not affect
the functioning of the steam ironing
system.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands