manualshive.com logo in svg

Miele FashionMaster, Operating Instructions Manual

Share
Download
Miele FashionMaster Operating Instructions Manual Download Page 42

Steamer

42

Brush attachment

The steamer is equipped with a brush
attachment which can be clipped on.
The brush attachment helps to raise the
fibres.

You can hold the steamer directly
onto the fabric while the brush at-
tachment is in place.
Always try it first on an inconspicu-
ous part of the fabric.

Connecting the brush attachment

Hold the brush attachment in front of
the steamer so that the lugs on one
side fit into the notches on the
steamer.

Press the side of the brush attach-
ment against the steamer until the
lugs snap into place.

Guide the brush attachment into the
notches on the opposite side.

Press the brush attachment against
the steamer until the lugs snap into
the notches.

The brush attachment is now connec-
ted to the steamer and can be used.

Removing the brush attachment

To remove the brush attachment, pull
it off the steamer by the raised sec-
tion.

Summary of Contents for FashionMaster

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands