Miele DA 6590 W Operating Instructions Manual Download Page 75

Page: 75 / 96

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The Optical Interface is

flashing quickly.

The buzzer is sounding.

One of the following

faults appears in the

display:



Open water supply

The water supply is turned off.



Turn on the water supply all the way.



Intake

Before fixing the fault:



Turn the dishwasher off with the



button.

There is a problem with the water intake.



Turn on the water supply fully and start the pro‐

gram again.



Clean the water intake filter (see "Frequently asked

questions").



The water pressure at the intake is lower than 4.35

psi.

Contact a plumber.

The following message

appears in the display

during the

Energy Saver

program:



Intake temp. low

The intake water has not reached the required tem‐

perature of 120°F (45°C) (see "Water connection -

Water intake").



Start the program again.



If the fault message appears again, select a differ‐

ent program.

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands