Miele DA 6590 W Operating Instructions Manual Download Page 26

Page: 26 / 96

Before using for the first time



Add rinse aid only until it is visible in

the opening.

The rinse aid reservoir holds approx.

3.7 oz. (110 ml).



Close the flap firmly so that it clicks

into place. Otherwise water can enter

the rinse aid reservoir during a pro‐

gram.



Wipe up any spilled rinse aid. This

prevents over-foaming occurring dur‐

ing the next program.

You can adjust the rinse aid dosage

for best results (see "Settings menu -

Rinse aid").

Rinse aid indicator

When the



Refill rinse aid

message ap‐

pears in the display, the reservoir con‐

tains sufficient rinse aid for 2 - 3 pro‐

grams only.



Add rinse aid.



Confirm with

The rinse aid refill indicator will go out.

If you only ever use Tab products in

your dishwasher, you can turn off both

refill indicators for salt and rinse aid if

you wish (see "Settings menu - Turn‐

ing off the refill indicators").

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands