Miele DA 6590 W Operating Instructions Manual Download Page 79

Page: 79 / 96

Frequently Asked Questions

Noises

Problem

Possible cause and solution

There is a knocking

noise in the wash cabi‐

net.

A spray arm is hitting the dishware.



Interrupt the program, and rearrange the items

which are obstructing the spray arm.

There is a rattling noise

in the wash cabinet.

Dishware is moving around in the wash cabinet.



Interrupt the program and rearrange loose pieces.

A foreign object (e.g., a cherry pit) has become

lodged in the drain pump.



Remove the foreign object from the drain pump

(see "Maintenance - Cleaning the drain pump and

non-return valve").

There is a knocking

noise from the water

pipe

This may be caused by the installation or the diame‐

ter of the water pipe.



This has no influence on dishwasher function. If in

doubt, contact a suitably qualified plumber.

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands