Miele DA 6590 W Operating Instructions Manual Download Page 56

Page: 56 / 96

Settings menu

Adjusting default values
Opening the Settings menu



Open the door.



Switch the dishwasher off with the



button if it is switched on.



Press and hold the

button.



Switch the dishwasher on with the



button. Release this button as soon

as the background lighting lights up

in the display. Keep the

button

pressed for at least 4 seconds.

The first option in the Settings menu

will appear in the display.

To learn about the display, read the

section with the same name.



Use the



arrow buttons under‐

neath the display to select the option

you want to change and confirm your

selection with

Sub-menu options which have already

been selected will have a check



be‐

side them.



To exit a sub-menu, use the



ar‐

row buttons to select

Back 

and

confirm with

The display will revert to the menu

above.

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands