Miele DA 6590 W Operating Instructions Manual Download Page 45

Page: 45 / 96

Operation

Turning on



Turn on the water supply if it is turned

off.



Open the door.



Make sure the spray arms are not ob‐

structed.



Press the



button for at least 2 sec‐

onds.

The program selected will appear briefly

in the display and the appropriate indi‐

cator light will come on.

Then, the display will show the estimat‐

ed program duration for the program

selected.

Selecting a program

Choose your program according to the

type of load and the degree of soiling.
The different programs and their uses

are described in the

Program Over‐

view

chapter.



Use the program selection button



to select the program required.

The indicator light of the selected pro‐

gram will come on.
Additional programs can be selected

using the

Additional



option.



Use the program selection button



to select the

Additional



option.

The first of the additional programs will

appear in the display.



Use the



arrow buttons to select

the program required.

During the course of the program, you

can use

to display the name of the

program which is currently running.

You can now select program options

(see "Options").
If any program options are selected, the

appropriate indicator lights will also

light up.

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands