Miele DA 6590 W Operating Instructions Manual Download Page 53

Page: 53 / 96

Options

EcoStart

The

EcoStart

function allows you to take

advantage of time variable economy

rates of electricity. Before you can use

this option, you must set up to three

electricity rate time zones (see "Settings

menu - EcoStart").

You then set the latest time at which the

program selected should end.

The dishwasher will start automatically

in the cheapest rate zone within the

time set.



Use the



arrow buttons to set the

hour and confirm with

The hour will be saved and the minute

number block will be highlighted.



Use the



arrow sensors to set the

minutes and confirm with

The estimated start time for the pro‐

gram selected will appear in the display.

The



indicator light will come on.



Close the door within four seconds.

The selected program will start auto‐

matically during the most cost effective

time zone. It will finish at the latest by

the set finish time.

Changing or deleting set times

You can change the set times or the

program before the start time in the dis‐

play is reached.



Open the door.



Press the



button.



Use the



arrow buttons to select

the setting you want to change and

confirm with



Use the



arrow buttons to select

the

Change

Delete

function and

confirm with

After confirming the

Change

function,

you can change the set time.
After confirming the

Delete

function, the

program duration will appear in the dis‐

play for the selected program.

The



indicator light will go out and the

indicator light for the selected program

will come on.



Start the program by closing the

door.

If you open the door for more than

four seconds before the start time is

reached, the message

Continue with OK

appears in the display. Press the

button and close the door within four

seconds to restart the FlexiTimer.

Summary of Contents for DA 6590 W

































































































Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands

Miele DA 6590 W, Operating Instructions Manual

Search results

Summary of Contents for DA 6590 W

Reviews:

Related manuals for DA 6590 W

Brands by name

Popular brands