HYB-1000 KIT
2. Once the CVG-2 is connected and communicating with
the HYB-1000 tester, the RUN CHART screen is displayed.
The tester will begin graphing the amperage from right to
left.
Amps from
battery pack
Amps to
battery pack
Measured
voltage at
the battery
pack
Measured
Amps at the
battery pack
Run Chart
3. Press the END soft key to end the charting process.
Drive Test
The drive test is an interactive, menu-driven test that
uses live vehicle sensor information while performing
an accelerated drive test. The HYB-1000 tester will
then let you print the results to the optional IR printer
at the end of the test.
Working with the CVG-2 module and the vehicle’s onboard
computer, the Drive Test measures the conductance and state-
of-health of the individual blocks within the hybrid battery
pack. Average voltage and voltage change across all of the
blocks is also measured. The HYB-1000 tester will also analyze
the rate of temperature change across all the blocks within the
pack.
The drive test requires the vehicle to repeatedly accelerate and
decelerate until sufficient data has been collected.
The testing process will begins once the vehicle is in motion.
The tester will emit a notification tone once enough data has
been collected to render an accurate test result.
Performing A Drive Test
1. From the HYBRID TESTS menu, select the DRIVE TEST icon
and press the SELECT soft key.
If the CVG-2 wireless convergence module has not been
connected to the OBD-II connector, the tester will prompt
you to connect it at this time.
2. Once the CVG-2 is connected and communicating with the
HYB-1000 tester, the first of two INSTRUCTIONS screens
are displayed.
Instruction Screen 1
NOTE: For the most accurate results, make sure
the vehicle has been properly warmed up before
performing the Drive Test..
Press NEXT to continue to the next screen or BACK to
return to the HYBRID TESTS screen.
3. The safety reminder screen appears.
Instruction Screen 2
Press NEXT to continue.
4. The Drive Test instruction screen appears.
Instruction Screen 3
Press NEXT to continue.
