background image

HYB-1000 KIT

Coupon

The COUPON SELECT utility allows you to print one 

of the three custom coupons or messages  created in 

the EDIT COUPON utility. 

1. Use the UP (

) or DOWN (

ARROW key, or press the

corresponding numerical key (1, 2) to move the dot to the

option button of your choice.

  NO COUPON PRINTED

  USER COUPON

2. Press the 

SAVE soft key to save your setting or the BACK

soft key to return to the Utility Menu  without saving the

changes.

Edit Coupon

The EDIT COUPON utility allows you to create a pro-

motional coupon or message for your customers that 

prints at the bottom of every test result. Its two infor-

mation screens contain eight lines of text with a maxi-

mum of 17 characters per line. 

To create and edit a coupon, see the procedure under 

Shop

 in 

this chapter for using the keypad to enter and backspace over 

characters. Use the template to plan and center your text.

Temp

The TEMP. UNITS utility enables you to set the units of 

measure to either Celsius or Fahrenheit. 

To set your preference:
1. Use the UP (

) or DOWN (

ARROWor press the cor-

responding numerical key to move the dot to the option

button of your choice.

  DEGREES F

  DEGREES C

2. Press the 

SAVE soft key to save your setting.

Format

Select this utility to format a data card to receive data 

or erase all data on the card. The HYB-1000 will warn 

you before formatting the disk, and ask if you want to 

continue.

Update

When  software  updates  are  released,  this  utility  en-

ables you to update the analyzer’s software using files 

on a data card.

Summary of Contents for HYB-1000


























Reviews: