HYB-1000 KIT
2. If no problems are found, the tester displays a battery pack
okay message.
No Trouble Codes Found
If any problems were found during the testing process, a
listing of the Diagnostic Trouble Codes is displayed.
Diagnostic Trouble Codes
Each displayed code indicates a problem the tester has
found.
3. To view the description and cause for each trouble code,
use the ARROW keys to select the desired Trouble Code
and press the VIEW soft key to continue. You can also
press the associated number key on the tester keypad to
go directly to the description.
A description of the Trouble Code is displayed on the
screen.
Trouble Code Description
4. Use the UP (
) or DOWN (
) ARROW keys to display the
cause of the Trouble Code (if available).
Trouble Code Cause
5. Press the BACK
soft key to return to the TROUBLE CODES
screen.
Clear Trouble Codes
This function clears the TROUBLE CODES results from
the vehicle’s onboard computer.
1. From the HYBRID TESTS menu, use the ARROW key to se-
lect the TROUBLE CODES icon and press the
SELECT soft
key.
Hybrid Tests Menu
The TROUBLE CODES menu appears on the screen.
2. Using the
ARROW
keys, highlight the CLEAR TROUBLE
CODES icon and press the SELECT soft key.
Highlighted Clear Trouble Code Icon
The tester will attempt to connect with the CVG-2 module.
If the module is not connected, the tester will prompt you
to turn the key on and connect the module at this time.
3. At the confirmation screen, press the YES soft key to clear
the codes. The HYB-1000 tester will confirm that the codes
have been cleared.
Run Chart
The Run Chart function is designed to measure and
graphically display the amperage moving in and out
of the hybrid battery pack. Voltage is also measured
across the battery pack.
To perform an accurate test using the Run Chart, the vehicle
must be driven while the tester displays the data.
NOTE: Always obey all traffic laws while performing
this test.
1. From the HYBRID TESTS menu, select the RUN CHART icon
and press the SELECT soft key.
If the CVG-2 wireless convergence module has not been
connected to the OBD-II connector, the tester will prompt
you to connect it at this time.
