![background image](http://html1.mh-extra.com/html/midea/esk-4875-ix-herd/esk-4875-ix-herd_manual_1791377082.webp)
EN-40
TROUBLE SHOOTING
08
▲
Before contacting an expert
Read the following troubleshooting table before contacting an
expert.
Problem.
Possible cause
Solution
Device does not work.
The power supply is
disconnected.
Check the fuse of your domestic
wiring system.
The upper part of the
food is too dark, and
the lower part is too
light.
Not enough lower heat.
-Select the upper/lower heat
function.
-Use a deeper baking dish.
-Reduce the oven temperature.
-Insert the baking dish into the
lowest guide rail.
The lower part of the
food is too dark, and
the upper part is too
light.
Too much lower heat.
-Select the upper/lower heat
function.
-Use a deeper baking dish.
-Reduce the temperature.
-Insert the baking dish into a
higher guide rail.
The food is done on the
outside but not on the
inside.
Temperature too high.
Reduce the temperature and
increase the cooking time.
The oven lamp does not
work.
The lamp is loose or
damaged.
Tighten the lamp or replace it
(see “Replacing the oven lamp”).
NOTE:
Should you still have problems with your device after following
the steps above, please contact your distributor or an authorized
specialist.