![background image](http://html1.mh-extra.com/html/midea/esk-4875-ix-herd/esk-4875-ix-herd_manual_1791377063.webp)
EN-21
▲
CAUTION
• The installation of the device must allow for sufficient heat
dissipation . Air inlets and outlets must not be blocked.
• Worktop, back panels, veneers, plastic coatings, and adhesive
used must all have sufficient heat-resistance (up to 100°C).
• Hob and oven must be from the same manufacturer and have the
same type designation.
• The device conforms to heat insulation class Y, i.e. only one side
of the device may be installed near higher kitchen furniture or
walls.
• Do not install the device directly next to refrigerators or
freezers. The escaping heat would result in an unnecessary
increase of energy consumption of those appliances.
• Make sure to align the centers of the oven and the hob.
▲
Dimensions and cabinet cutout
▲
Installation in a cabinet base
Fig. 1
Prepare the cutout of the cabinet base using the dimensional drawing.
Dimensions in mm.
Fig. 1
490
590
560
520
60
575
595
595
560
570
min.
560
606
600
80
250
100
▲
Selection of installation equipment
• Cut out the work surface according to the sizes shown in the
drawing.
• For the purpose of installation and use, a minimum of 5 cm space