![background image](http://html1.mh-extra.com/html/midea/esk-4875-ix-herd/esk-4875-ix-herd_manual_1791377066.webp)
EN-24
able to withstand an temperature of 90°C.
▲
Installing the hob
• First check the factory fitted hob seal at the hob frame to the
integrity and the proper fit.
• Place the hob according to the hob drawing under "Appliance
Overview" and with the connecting cable first centrally into the
prepared cutout of the worktop.
• Depending on the worktop thickness A or B, fix the hob in place
by attaching the supplied retain-ing clips from below to the holes
provided in the hob and fastening them with the screws.
• Make sure that the distances to the cutting are equal on all four
sides and that the seal is resting on the worktop.
Note: To avoid damage, place the hob with the top of the cooking
surface on a padded base.
▲
Installing the oven
• Setup the cabinet base for the installation of the stove referring to
the dimensionsin “Fig.1”.
• Connect to the mains referring to “Electric connection”.
• Insert the oven part way into the previously prepared cabinet base
and connect to the hob referring to the chapter “Connecting the
hob”.
• Then push the oven completely into the cabinet. Make sure not to
impede(bend,squeeze,or twist)the cables.
• Attach or secure the oven to the respective fixtures using the
two screws. Opening the oven door will uncover the designated
mounting holes on the left and right of the frame.