![background image](http://html1.mh-extra.com/html/midea/esk-4875-ix-herd/esk-4875-ix-herd_manual_1791377076.webp)
EN-34
▲
Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
1. Rotate " K1 " to select the pyrolytic function. LED will display
" PyR ".
2. Press " " to confirm the cooking. And the default time is 2 hours,
" PyR " will display on the LED.
3. Rotate " K1 " to change the pyrolytic time. The timer can be set 1:30
or 2:00 hours.
Note:
a. When the oven door was not closed, pressing start button will be
invalid. The LED will display " door " and " PyR ".
b. The LED will display " CooL " and " PyR ". When the oven's center
temperature is lower than 200°C, press cancel button once, it will
pause; press again, it will return to waiting state. If higher than
200°C, press cancel button once, it will return to waiting state
directly.
c. Open the door when the oven is working, the LED will display "
door " and the buzzer will sound continuously until the door was
closed or press cancel button.
d. Before activating the pyrolytic cleaning function, remove any
excessive spillage and make sure that oven is empty. Do not leave
anything inside it (e.g. pans, baking tray, dripping pan, slider
bracket etc.) as this could heavily damage them.
e. When finished pyrolytic cleaning, don't interrupt the power in an
hour.
f. Under PYC conditions the surfaces may get hotter than usual and
children should be kept away.
g. Excess spills must be removed before washing. Accessories other
than the slide rails can be left in the oven during washing.
▲
Combination furnace function
1. When pyrolytic function is working, if hob is started, the oven
will stop working after 1 minute and return to waiting state. Other
functions of the oven do not affect the work of the hob. The screen
displays the corresponding interface.
2. When the hob is working, if you set the pyrolytic function, the
screen will display "----". The oven can not work when you press
"Start". When the hob is closed, "-- -" will disappear after 4
-
seconds.
3. When the appointed time for pyrolytic function reaches but the
oven is working, the buzzer will sound twice and the oven return
to waiting state.