![background image](http://html1.mh-extra.com/html/midea/esk-4875-ix-herd/esk-4875-ix-herd_manual_1791377067.webp)
EN-25
▲
Electric connection
WARNING:
• Have the device connected to the mains only by an authorized
expert. The installation must follow the applicable standards and
regulations.
• Connecting the device to a normal wall socket or using multiple
sockets or extension cables is not permitted.
▲
Information for authorized experts:
• Instructions regarding different connection methods are located
on the rear panel of the device next to the terminal box of the
oven.
• Before connecting the device, make sure the local voltage matches
the specifications on the rating label.
• Make sure to connect the protective ground to the terminal of
the marked terminal block. The electric connection of the oven
should incorporate an emergency switch for disconnecting the
entire device from the mains in case of an emergency. The distance
between the normally open contacts of the emergency switch
must be of at least 3 mm.
• The device is suitable for three-phase and AC current (400V
3N~50Hz).
• The heating elements have a nominal voltage of 230V. The device
can be adjusted for single-phase current (230V) by a respective
bypass on the terminal block, based on the circuit diagram below.
Select a suitable cord as mains cable, considering the connection
type and nominal power of the oven.
• Fix the mains cable in the tension relief.
• Guide the mains cable in such a way that it does not get in contact
with any hot components of the device. Do not lead it over sharp
edges or corners.