Middle Atlantic Products C3 1-bay, Instruction Sheet

Page: 17 / 38

2. With the shovel lances hooked in the holes, push downward on the brackets until they lock into place.
NOTE : Adjust torque on power driver to lightest setting and increase as needed.
3. Use a power driver, #2 Phillips bit, and (2x) 8-32 x 5/16” thread forming screws (N or AF) to secure the
Lever Lock brackets (L or AD) to the frame as shown. (
FIGURE R
)
INSTALLING LEVER LOCK™ BRACKETS OUTSIDE OF RACK OPTIONS
NOTE :
• Lever Lock™ brackets are installed outside of both the Slide-Out Rack (C3-TECHKIT4-SO) and Fixed
Rack (C3-TECHKIT4-ST) options. This topic shows the Slide-Out Rack, but the procedure is the same
for the Fixed Rack.
• Lever Lock brackets (L or AD) and 8-32 x 5/16” thread forming screws (N or AF) are provided for both
the Slide-Out Rack (C3-TECHKIT4-SO) and Fixed Rack (C3-TECHKIT4-ST) options.
1. Hook the shovel lances on the Lever Lock
brackets (L or AD) into the 5th set of rectangular
holes on the frame (shaded) beneath the
slide-out or fixed brackets as shown.
( FIGURE P )
Page 17
FIGURE R
L or AD
Hole on the Lever Lock
bracket lines up with
hole on frame for screw.
FIGURE P
Shovel lances
on back of Lever
Lock brackets.
L or AD
Use the 5th set of
rectangular holes
beneath the slide-out
or fixed rack option
brackets when
attaching the Lever
Lock brackets.