Middle Atlantic Products C3 1-bay, Instruction Sheet

Page: 18 / 38

INSTALLING LEVER LOCK PLATES OUTSIDE OF RACK OPTIONS
INSTALLING LEVER LOCK OPTION (LLOCKSWRF-KIT) INSIDE SLIDE-OUT RACK OPTION
Page 18
FIGURE S
FIGURE T
NOTE : The (20x) Lever Lock plate washers (P or AG) are provided
for equipment mounting convenience.
NOTE : The Lever Lock option requires the purchase of the Slide-Out Rack Option (C3-TECHKIT4-SO).
NOTE
: 4” Lever Lock plate (R or AH) are provided for both the Slide-Out Rack (C3-TECHKIT4-SO) and
Fixed Rack (C3-TECHKIT4-ST) options.
• Attach the 4” Lever Lock plate (R or AH) by installing the side without the clip into the brackets first.
Then, install the side with the clip until it clicks into place. ( FIGURE S )
Side with
clip
Side without
clip
Clip
Pull up on levers inside of tracks on
both sides of the rack to release.
NOTE : Shaded
region shows inside
of track mechanism.
NOTE : 4” Lever Lock plate shown.
R or AH
1. Remove your slide-out rack (K) from the brackets
by pulling the rack into the open position, pulling up
on the levers inside of the tracks, and carefully
lifting the rack off the brackets. ( FIGURE T )
NOTE : Install plastic securing
rivet (M or AE) into hole to
secure the clip more
permanently, if desired.