ATTACHING THE WOODKIT TO THE FRAME
Page 30
1. Team lift the woodkit (A, oriented as shown with the fan opening(s) on the bottom) and carefully
attach it to the frame (B). (
FIGURE AU
)
NOTE
:
• Be careful not to pinch any cables while securing the woodkit to the frame.
• Verify the torque on your power driver is on the lightest setting and only increase as necessary.
• You may have to temporarily remove any installed rack options and shelves when attaching the woodkit
to the frame.
2. While holding your woodkit in place on the frame, use a power driver, #2 Phillips bit, and
10-32 x 3/8” machine screw(s) (H) to secure the top of your frame to the top of the woodkit as shown.
Do not overtighten. (
FIGURE AU
)
NOTE
:
• The 10-32 x 3/8” machine screw(s) must be used in each bay to properly secure the top of your frame
to the top of the woodkit.
• The following figure is an upward view attaching a 1-bay woodkit to its frame.
FIGURE AU
H
Summary of Contents for C3 1-bay
Page 38: ......
