Middle Atlantic Products C3 1-bay, Instruction Sheet

Page: 25 / 38

REMOVING PRE-INSTALLED DOOR(S) FROM THE WOODKIT
Page 25
NOTE
:
• For ease of woodkit (A) installation, we recommend removing the doors first as shown in this procedure.
• When removing doors from a 4-bay model, keep track of which bay each door came from for easy
reinstallation as the inner doors differ from the outer doors.
1. Carefully remove your woodkit (A) from the packaging and place in an upright position on floor or
stable platform.
2. Remove the pre-installed door (or doors on 2- and 4-bay models) from the main woodkit by opening
the door, pressing the levers on the hinges, and carefully pullng inward as shown. ( FIGURE AF )
TIP
: If the door does not come off the hinges easily, make sure both top and bottom hinge levers are
fully pressed. Then, gently push the outside of the door slightly past the open position. This forces the
inside of the door inward and should release the hinges. ( FIGURE AG )
3. Carefully set aside removed door (or doors on 2- and 4-bay models).
NOTE : When removing doors from a 4-bay model, keep track of which bay each door came from for
easy reinstallation as the inner doors differ from the outer doors.
FIGURE AF
FIGURE AG
With both hinge levers
pressed, gently push
the outside of the door
slightly past the open
position.
Press this lever on both
hinges to release door.