54
<Command>
*SRE <NR1>
*SRE?
Function
：
It sets or queries the status of Service Request Enable Register.
Description
：
Set parameter 0~255
Set syntax*SRE 1
Query syntax*SRE?
Return data 1 (Format is in <NR1>)
<Command>
*STB?
Function
：
It queries the status of Service Request Status Register
Description
：
Query syntax*STB?
Return data<NR1>
<Command>
*WAI
Function
：
It makes 6630 wait until all previously sent commands are completed. The 6630 then
continues executing the commands that follow the *WAI.
<Command>
*TST?
Function
：
The response to this query is always 0.
Query syntax *TST?
Return data 0
<Command>
*TRG
*TRG?
:TRIGger
:TRIGger?
Function
：：
It executes Trigger action. If using *TRG? and :TRIGger, it executes Trigger action
and returms test data.
Set syntax*TRG
Query syntax*TRG?
Return data -6.337855E-08,+3.980846E-06,+1.02,-2.280857E-04,0
<Command>
:DISPlay:PAGE
{MEASure|SWEep|CORRection|LSET|LRUN|LCORRection|SYSTem}
:DISPlay:PAGE?
Function
：
It sets or queries the page currently displayed on the LCD screen.
Description
：
Set parameterMEASure(meter mode), SWEep(sweep mode), CORRection(correction
page),LSET(list mode), LRUN(list run), , SYSTem(system page).
Set syntax :DISPlay:PAGE MEASure
Query syntax :DISPlay:PAGE?
Return data MEAS (Format is in <disc>)
